2 in 1 Developer/Finisher
This negative working developer and finisher is used to process and finish Agfa®, Anocoil®, Dot Works, Kodak-Polychrome®, Konica®, IBF®, Presstek®, Southern Litho® and many more OEM plates. Using a soft pad or sponge gently spread over the entire plate surface, until all the non-image areas have been remove. Dry the plate thoroughly using a clean cloth until perfectly dry. Do not wash the plate until it is mounted on the press. May also be used in any 2-in-1 plate processor.
Positive Plate Developer
For Developing all positive working Lithographic plates. Using a soft pad or sponge gently spread over the entire plate surface, until all the non-image areas have been removed. Wash thoroughly with water and finish. May also be used in any positive plate processor. Finish with PreBake if baking. Finish with Subtractive Finisher if not baking.
Subtractive Developer
This negative working developer is used to process Agfa®, Anocoil®, Dot Works, Kodak-Polychrome Elite®, IBF®, Konica®, Southern Litho® and many more OEM plates. It is ready-to-use and requires no dilution. It can be used by hand with a soft sponge or with any negative plate processor. Finish with Subtractive Finisher.
Subtractive Developer F (Fuji®)
This negative working developer is used to process Fuji® and IBF plates. It is ready-to-use and does not require dilution. It can be used by hand with a soft sponge or with any negative plate processor. Finish with Subtractive Finisher.
Subtractive Finisher
This finisher has been designed to work in processors which do not possess good squeegee pressure between the final finishing rollers. It provides a “light” yet effective seal to both negative and positive plates as well as Violet & Thermal plates and does not build up on the rollers like the standard “Gum Arabic” based finishers. When used by hand it must be buffed down to provide a good protective seal.